Easyflush WC Flush Control Valve

Easyflush no touch dual flush WC cistern valve

The Easyflush no touch dual flush WC cistern valve promotes best practice in water economy and hygiene in both domestic and commercial washrooms. Easyflush is two valves in one: a lift/drop valve which empties the cistern and a float valve which controls refilling. It also includes an integral overflow pipe to prevent flooding. The compact single-piece unit is firmly located over the outlet by a bayonet-type locking device to simplify installation or removal for servicing.

Sensor Operation

The Easyflush valve provides electronic flushing and filling of the WC. There are two versions to suit different applications. Easyflush ‘wave’ and Easyflush ‘walkaway’

Easyflush wave is operated by the user bringing their hand close to an infrared sensor. The dual flush mode enables the user to select either a part or full flush by the length of time their hand is in front of the sensor. For part flush the hand is waved in front of the sensor for up to 1 second and for full flush over 1 second.

Easyflush walkaway is normally activated by the user standing up or leaving the cubicle; however it can also be activated by the user bringing their hand toward the sensor.

The walkaway version comes with dual flush factory programmed. A part flush will be delivered if the user departs from the cubicle within 60 seconds and a full flush will be delivered if the user departs after 60 seconds.

If the user is dissatisfied with the flush they can bring their hand close to the infrared to activate a further flush which will be stored in the memory and activate once the cistern has filled. Both versions are superior to traditional wc flushing systems for both hygiene and ease of use, particularly for those with disabilities. Both versions meet the DDA requirements.

Easyflush is powered by 4 x 1.6V AA (LR6) batteries or a 6V DC mains adaptor which can be installed behind service panels. The battery option allows the Easyflush to be installed inside exposed cisterns. Also available as an optional extra is a multi product mains power supply unit (PSU) to power up to 20 sensors from a single fused spur.

Sensor positioning

Valve Operating Sequence

When activated the sensor electrically activates the lift/drop valve in the sequence shown below.

If during cistern refill a user requests a flush, the Easyflush records the request and a full flush will be completed once the cistern has refilled.

Cistermiser concealed cistern - with pre-installed Easyflush valve

The cistern is supplied with the Easyflush valve already installed inside it: the installer only needs to connect to the water supply and pan. To install and commission there are three easy steps.

Mount the cistern directly on the wall/panel.
Mount the sensor through the panel or wall and fit the power source.
Connect the water supply and sensor leads.

Access to the valve after installation is simple and obtained by removing the lid of the cistern.

Features and benefits

Suitable for the majority of 6 litre WCs
Supplied with Easyflush WC Flush Valve already fitted
Supplied with 38mm (1.5”) as standard. 50mm (2”) diameter on request
Easy to install and remove
Ideal for installation behind panels in domestic or commercial applications
Ideal for installation behind panels in domestic or commercial applications
Side entry water inlet supplied as standard (bottom entry available on request)
Internal overflow included

EasyFlush installation guide [PDF document]

Product overview

FAQ

BREEAM compatible product